2015年8月30日星期日

Economic advantages of steel structure house

1.Convenient construction, short construction period
Steel structural components can be implemented in factory production, on-site installation. Due to the small amount of field work, the environmental pollution is little, at the same time, the degree of construction mechanization is high, and the construction speed is accelerated. According to the statistics, construction period of steel structure than the concrete structure can be shortened 1/3, and can save the supporting material.

2.Low cost
Due to the light weight, the basic cost is reduced, the overall material is reduced, the direct cost is reduced, the construction period is shorter, the indirect costs can be reduced, so the comprehensive cost is low.

3.In accordance with the requirements of house industrialization and sustainable development
Steel truss structure suitable for large quantities of factory production, high degree of industrialization, set energy saving, waterproof, heat insulation, doors and windows and other advanced product in one. Integrated design, production and construction, improve the level of house industrialization.

In addition, the steel scrap can be 100% recycling, so called "steel structure building" for "green building", it is the new building form adapted to our human sustainable development strategy .



This blog is published by china steel space frame manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月25日星期二

What is the effect of steel roof truss support?

To ensure the integrity of the roof truss, improve the space stiffness.Only consists of a plane truss purlin roofing and the steel roof structure is an unstable system, if some of the roof in the proper position with support combine and become stable space system, the rest of the roof again by purlin or other components connected in this space stable system and guarantee the stability of the steel roof structure. Avoid pressure rod lateral instability, prevent rod produced large vibration and support as the chord roof truss rod lateral support, reduced chord of the out of plane calculation length.Bear and pass horizontal loads, such as longitudinal and transverse wind load, the horizontal load and seismic action of the crane.Ensure stability and convenient during mounting, roof installed first support will be two adjacent roof truss linked body composition of a basic space stability and order of can be based on to the installation of other components.

This blog is published by china steel roof structure manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月19日星期三

Application of light gauge steel structure moving house

Light steel structure moving house is a kind of room that can be easily assembled and moved, and it is often the 1~3 layer structure.The interior of the room can be made up of several boxes of flexible large space, can also be used to cut off light board into a small room.The light steel mobile house can be arranged veranda, ourdoor stairs or indoor stairs. Single case unit, is a base consist of the light H-section steel, channel steel, square steel tube; pillars, longitudinal beam made by special shape of cold-formed steel made. The roof uses color steel plate, insulation material and steel ceiling board; wall with steel sandwich board. In the column section design, consider setting downpipe and wire. Light steel structure is widely used in light steel mobile house for a variety of temporary office, accommodation, hospitals, classrooms, gymnasium and warehouse, etc.; kiosks and ticketing commercial building; bathroom, security and other special housing; various emergency, disaster relief and other space. Light steel moving house can also be carried out inside and outside the decoration of high-grade mobile housing in accordance with the requirements of customers.

light steel structure building

As mentioned above, the need for temporary construction is greatly increased, and it is a very big market.But at present, the domestic market is temporary confusion,motley crowd, often occur safety accidents.Some temporary housing suddenly collapsed in use, and some were blown down by the wind, some collapsed in mounting or demounting, causing casualties and property losses, so to ensure the temporary housing security is imminent.

As a result of light steel moving house is a new product, still lack a lot of standard system should be unified, so it also need to solve this problem in a short time.As long as the management is standardized, the product has a safety guarantee, this kind of house can be accepted by people.After all, mobile homes should be affordable than other housing. Should be a large number of light steel mobile house in the downtown area, tourist scenic area, street area, so that it is more stable in the market position.

This blog is published by china steel space frame manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月15日星期六

What is the hidden frame glass curtain wall

Concealed frame glass curtain wall is a kind of innovative technology products that have started in twenty-first Century. Glass curtain wall is made of a frame with glass as a building decoration and perimeter protection structure. Now the high-rise building many have adopted glass curtain wall, because it combines the aesthetics, function and architecture together, reflect different beauty from the point of view of color, transparency and luster. While the invisible glass curtain wall use the structural adhesive to connect the metal frame, only use the structure adhesive to bear the weight without the original metal buckle support or connection. From the outside, it looks like the glass is connected to a single piece of glass, which reflect and filter the light. As the external structure of the building, it has the role of environmental protection and energy saving.

hidden frame glass curtain wall


This blog is published by the hidden frame glass curtain wall manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月12日星期三

The ability of light steel building to resist earthquake

For the design of light steel buildings, each region will according to local geological conditions to define different housing seismic fortification intensity, specifically is an ability of building to prevent the destruction from the earthquake. The seismic fortification intensity of each city and region is different, and the seismic fortification intensity of the general city is in the 6-9 degree. While the general building of the useful life is 50 years, that is, the corresponding period of seismic fortification intensity is 50 years.

light steel structure house
light steel structure house
The design and construction of light steel structure house of our country is according to the current national standard "The Low Rise Cold-formed Thin-walled Steel Housing Technical Code For Building" JGJ227-2011, and "The Low Rise Cold-formed Thin-walled Steel Housing Technical Code For Building" JGJ227-2011, approved by the Ministry of housing and urban and rural construction in 2011 on January 2, announcement, released.

The formulation process, the working group including Shanghai Tongji University and Xi'an Architecture And Technology University were investigated extensively , to complete the three full scale vibration table test (a 2 layer, two layer 3) of the rules. The research shows that the key to ensure the overall stability of the light steel structure is to ensure the structural seismic resistance of the structure when anti-shear and anti-pull connecting between the layers of the light steel building. According to the experimental phenomenon, such light steel buildings can meet the requirements of do not collapse in the earthquake intensity of 9 degrees.


This blog is published by the space frame manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月7日星期五

The size design of ordinary steel truss span

According to the use and process requirements to determine the general 3M as a module.The roof span is 3 times, 12 m, 15 m, 18 m, 21m, 24 m, 27 m, 30 m, 36 m,also have a greater span.Triangular steel purlin roof structure is flexible, not limit by 3M modulus.

Steel truss span calculation: the roof supports distance force, generally take the distance between the axis of pillar minus 300 mm.

Roof height: according to the requirements of economic, stiffness, construction and transportation lines, roof slope and other factors to determine.Triangle truss height h= (1 / 4 ~ L / 6) L (span), in order to adapt to the requirements of materials with large roof roof slope.

Trapezoid truss relatively flat slope, the roof span height should meet the demand of stiffness, when the winding slope is 1 / 8 to 1 / 12, span height is generally (L / 6 ~ 1 / 10 L). The small value is taken when the span is large (or the roof load is small),otherwise large value.

End height: when the roof is hinged with the column is 1.6 ~ 2.2 m, when the rigid connection is 1.8 ~ 2.4 m; the large value is taken when the bending moment is large, otherwise small.

Height: according to the end height, roof slope, the maximum height should be less than the transport boundaries, such as railway transportation line is 3.85M.

Division of roof steel truss internodes should be determined according to the roofing material. When using a large house, the roof panel width is equal to the length of internodes, generally 1.5 m or 3 m; When using the purlin, according to the purlin spacing set, generally 0.8 ~ 3 m. Try to make the load of the roof effect directly on steel roof truss joints, avoid the top chord of local moment.

This blog is published by the steel roof truss manufacturer Jiangsu Andy Steel Structure Co. Ltd.

2015年8月3日星期一

Advantages and disadvantages of double glazing curtain wall

Advantages:
1.Sound insulation: due to the skin of the shielding effect of the noise, double glass curtain wall reducing the impact of outdoor noise for the interior.It is in is particularly suitable for the construction using double glazing curtain wall which is in a very strong traffic noise environment in the city center area.At the same time, double glass curtain wall can still introduce natural ventilation in the strong noise environment, reducing the building energy consumption.
2.Insulation: in the winter, the existence of outer curtain wall strengthened the insulation performance of the outer envelope. The heat loss of the building surface can be reduced effectively by the preheating of the air between the double glass curtain wall. And because the inner curtain wall temperature is relatively high, it is advantageous to the indoor thermal comfort.
3.Night ventilation cooling: in the hot summer, the internal temperature of the umbrella building may be too high.And double glass curtain wall and not to directly open the ventilation mode, so it has safety protection function, which makes office buildings can use the cool night air to natural ventilation indoor cooling in the summer night after work.
Double glass curtain wall of the sun blind is installed in the interlayer, compared to the single glass curtain wall of the plug, this way is more conducive to the protection of the blinds.Especially some complex, expensive metal shutters, sun and rain will not only shortened service life, but also affect the shading and reflection effects. In addition, external blinds are often generated ambient noise. High technology park located in the outskirts of Munich, Germany, using a plug-in type metal shutters, ringing unceasingly in the breeze all day, while the double glass curtain wall shutter does not have this problem.Because of the existence of the outer curtain wall, the air pressure in the building is reduced, which makes it possible to open the window of the high-rise building, and the energy consumption of the mechanical ventilation is greatly reduced.In the architectural design, double glazed curtain wall due to the use of large areas of glass, making the building very high permeability.
4.Natural ventilation: a very important advantage of double glazing curtain wall is to allow natural ventilation. Natural ventilation can not only reduce the air conditioning energy consumption, but also to improve the environment of comfort, and enhance human health.
5.The layer of double glass curtain wall can be used as a fire passage.
6.Energy saving: as the double glazing curtain wall improves the performance of building heat preservation and heat insulation, and the umbrella can be natural ventilation for a long time, so that the building can save energy and reduce energy consumption.

Disadvantages:
1.Relative to the ordinary building, the cost of the external retaining structure is increased by 1.5-2 times.
2.In the strong summer sunshine, the temperature of air interlayer is often too high, especially when the double glass curtain wall between the interval is too small and the shading effect is poor, the temperature is sometimes higher than the outside temperature is,making the natural ventilation can not be achieved through the window.
3.Wall cleaning and maintenance costs of double glazing curtain wall are high.Double glass curtain wall based on the consideration of local climate and the special high altitude environment of high-rise building,umbrellas have a buffer and a weakening of the impact of the environment and the environment, and have the most basic use function at the same time,can maximum reduce dependence on non renewable energy.This design idea and starting point has far-reaching significance for saving energy, creating a sustainable development in the future. 

This blog is published by the double glazing curtain wall manufacturer Jiangsu Andy Steel Structure Co. Ltd.